Epoxy 6150 (Tan)

E2U Epoxy 6150 is VOC-compliant, high solids, 2-component, and designed as a base coat for color flake (chip) flooring. This application can be applied to new and existing concrete.

Our Epoxy 6150 formula allows a typical floor to be installed within one day and provides excellent adhesion and hide to concrete in a single coat application. Epoxy 6150 withstands up to 9 lbs of moisture vapor emissions. Epoxy 6150 adheres to damp or dry concrete and gives ample open time for broadcasting the color flakes (chips). Adding E2U Accelerator will speed up a dry time to as little as 2 hours.

IMPORTANT NOTE:
If full broadcast of flake chips is not disbursed, sanding will be required.

• Coverage:
• 200 – 225 SF/Gal Over freshly profiled concrete.
• Perks to this Epoxy are – Highest adhesion rating to concrete, “350”, Lifetime Adhesion Warranty on residential garage floors, Holds back up to 9 lbs. of Moisture Vapor Transmission.
• NOTE:
• This epoxy is specifically designed to be a PRIMER COAT ONLY! You must broadcast to refusal or topcoat this product w/another coat of either “PIGMENTED” Epoxy or Sealer or risk serious ambering.

Advantages 

• - Essentially odorless
• - Self-priming over properly prepared substrate
• - Lifetime adhesion warranty
• - VOC compliant
• - High color stability
• - Chemically Resistant
• - Withstands up to 9 lbs of moisture vapor emissions

Applications

• - Can be accelerated to dry in 2 hours
• - Low viscosity
• - Garage floors
• - Clean rooms
• - Manufacturing facilities
• - Automotive showrooms
• - Commercial kitchens
• - Grocery stores
• - Laboratories
• - Basements
• - Kennels
• - Restrooms
• - Locker rooms
• - Aisle ways